Basic Led strips are glued to all original Led beads to prevent moisture, but there are numerous drawbacks. When the colloid solution is caged on the Led bead, the Led color temperature of the Led bead will shift and the Led color temperature will increase, which is not as simple as the color before gluing. And if glued, it will reflect organically with the colloidal solution of the Led bead, and the Led bead will die or light damage.
Led strips with lenses, however, have none of this defect. When the lens is placed on the Led bead, it acts as a protective cover over the addressable led strips. After gluing, the strong glue is not easy to stick to the Led lamp bead, the Led color temperature of the Led lamp bead is not easy to alter, and the service life is longer. In addition, it can be fitted with a laminated glass support frame that can be used as a result of high-power Led wall wash lights. It looks high-end, high-end. Several lensed Led strips have been released for lighting fixtures, and their lenses come in 30, 60, 90, and 120 degrees, so the angle of view of the light reflected from the arm is contradictory. There is a contradiction in mapping spacing. Customers can choose lenses with conflicting perspectives according to the regulations of the project.
Line lamp manufacturers and lighting lamps promise to build results entirely free of charge, install and maintain technology, one-stop work, and give after-sales service maintenance and ensure. A great deal of outdoor material must be protected from moisture. For example, Led lamp belt, Led wall cleaning lamp, Led guardrail tube, Led light source, Led projection lamp, Led outdoor lighting project lights, headlights, crew prevention table, sink material, water open wheat grass and other special industries.
There are numerous problems such as short circuit fault, electric running, rust, rot, medium price damage, and influence on pennant signal light after the appliance is out of water. Therefore, moisture-proof usually refers to the prevention of moisture and water vapor from the outside of household appliances from invading, penetrating and injecting into the interior of household appliances. General Led line lights use Led bulbs. If the single-core working voltage is 1.8-3V, the general current will be controlled at 18mA-20mA, about the number of contradictory color temperature ic, the working voltage of each Led bulb is different, ultimately by professional technicians and technicians to check。