5 thoughts on “Buying a diamond to the ring is a 18K platinum ring, or is it good for the PT900 ring?”
Lynn
Buying a diamond ring mainly depends on diamonds. Generally, the value of diamonds accounts for a large proportion, so the first thing to consider is what diamonds in your budget are like. The theoretical is indeed the soft PT950, and the PT900 and 18K are relatively hard. So after seeing the diamonds, I think you can choose 900 and 18K on any. Is about the problem of refunding color. You need to be different from the surface polishing surface. If it is a formal manufacturer's general formula, it is better, so it will not be discreated. The wear is normal, and the general manufacturers can help you renovate from newly refurbished, low cost or no cost. . Another problem to consider dropping the stone is inlaid, grabbing inlaid is relatively stronger than forcing inlaid.
I work in a diamond company, and guests often ask this question. It the hardness of PT950 and 18K, but the softness of 24K gold is softer, and the hardness of diamond PT and 18K is sufficient. The difference between the two is that if the PT is not on after two or three years, it will be polished again. 18K is 75%gold, and then plated 25%of other metals on the surface. After two or three years, it is not on. Of course, many stores do not polish nor plating or collect money! Intersection Intersection This depends on yourself.
Zhou Dafu's good craftsmanship is very good. I bought a diamond ring at his house. 18K pays attention to maintenance. There will be no problems. When you buy Zhou Dafu, remember to ask them to apply for a good discount ,,,. Essence Essence
I think PT900 is better. If your drills have more than 20 points, you should use PT900, because more than 20 points of diamonds use the collection value. The manufacturer produces and leaves the factory.
Buying a diamond ring mainly depends on diamonds. Generally, the value of diamonds accounts for a large proportion, so the first thing to consider is what diamonds in your budget are like. The theoretical is indeed the soft PT950, and the PT900 and 18K are relatively hard.
So after seeing the diamonds, I think you can choose 900 and 18K on any.
Is about the problem of refunding color. You need to be different from the surface polishing surface. If it is a formal manufacturer's general formula, it is better, so it will not be discreated. The wear is normal, and the general manufacturers can help you renovate from newly refurbished, low cost or no cost.
. Another problem to consider dropping the stone is inlaid, grabbing inlaid is relatively stronger than forcing inlaid.
I work in a diamond company, and guests often ask this question.
It the hardness of PT950 and 18K, but the softness of 24K gold is softer, and the hardness of diamond PT and 18K is sufficient. The difference between the two is that if the PT is not on after two or three years, it will be polished again. 18K is 75%gold, and then plated 25%of other metals on the surface. After two or three years, it is not on. Of course, many stores do not polish nor plating or collect money! Intersection Intersection This depends on yourself.
18K, mainly buying drill
This inlaid with 18K inlaid
The same price 18K must be larger than platinum. It's about 10 yuan
Zhou Dafu's good craftsmanship is very good. I bought a diamond ring at his house. 18K pays attention to maintenance. There will be no problems. When you buy Zhou Dafu, remember to ask them to apply for a good discount ,,,. Essence Essence
I think PT900 is better. If your drills have more than 20 points, you should use PT900, because more than 20 points of diamonds use the collection value. The manufacturer produces and leaves the factory.