3 thoughts on “What kind of material does sucking box have?”
Shannon
Breeding packaging is divided into four materials: PVC, PET, PS and PP. Depending on the nature of the materials, the things they packaged are different. Moreover, the suction packaging can be divided into plastic bubbles, plastic inner trays, plastic tray, etc. according to the structure, the structure is different, and the things are different. For food, frozen foods such as vegetables, fruit fresh, dumplings, and dumplings are used as food packaging products. It must be produced in accordance with national sanitary standards to ensure non -toxic and environmental protection. Common food -grade materials are PET, PS, PP can be used as food sucking packaging. This packaging can be used to suck in chocolate, candy, biscuits, fruits and vegetables, fresh fresh and other foods. Installing digital products, electronics, and toys, this is generally transparently made of PVC or PET. It is also called plastic bubbles. Install hardware spare parts, electronic components, modules, module PC boards, etc. This kind of blister packaging can be used as different materials according to the requirements, and there is also a special anti -static plastic coating tray, which is also among them. PET and PVC materials have high transparency and good surface luster. Products are widely used in products such as toys, food, electronic products, medicine, electrical appliances, gifts, cosmetics, stationery and other products.
The suction box is a kind of non -fixed, odorless, non -toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastic. It has excellent physical and mechanical properties, especially with excellent impact resistance. High; small creep, stable size; good heat resistance and low temperature resistance, stable mechanical properties, size stability, electrical performance and flame retardant properties within a wider temperature range, which can be at -60 ~ It is used for a long time under 120 ° C; no obvious melting point is melting at 220-230 ° C; due to the large rigidity of the molecular chain, the resin melting viscosity is large; the water absorption rate is small, the contraction rate is small, the size is high, the size stability is good, the film is breathable Small sex; self -extinguishing material; stable light, but not ultraviolet light, good weather resistance; oil resistance, acid resistance, strong alkali, oxidized acid and amine, ketone, soluble in chlorine chloride and aromatic clan The solvent is easy to cause hydrolysis and cracking in water for a long time. The disadvantage is that due to poor anti -fatigue strength, prone to stress cracking, poor anti -solventability, and poor abrasion resistance. In observing the appearance of the plastic, you can initially identify the major category of plastic products: thermoplastic plastic, thermosetry plastic or elastic body. Generally, thermoplastic plastic has two types: crystallization and non -fixed shape. The appearance of the crystalline plastic is translucent, turbid or opaque, and only is transparent in the thin film state, and the hardness is from soft to keratin. Unde -ified is generally colorless. It is fully transparent when without additives. The hardness is from hard to keratin rubber (at this time adding additives such as plasticizers). Thermosetry plastic usually contains fillers without transparent materials, and is transparent when not contains fillers. Elastic body rubber -like feel has a certain stretching rate. There are two types of suction materials, one is non -loop -protection such as PVC, one is more environmentally friendly such as PP, PS, PET, and of course they are divided into many types in the middle. It is more environmentally friendly and can also be used for export. When it comes to cheap prices, the key is for your products. For different products, choosing properly compliance materials is cheap. For example If you can use 0.3mm thickness, you do n’t choose the thickness of 0.5mm. I personally feel that this is saving. To say that the absolute material is cheaper, in terms of the current market raw material price, it is basically not much different. In other words, the key is to choose the material for product selection.
Breeding products are mainly used for high -quality PVC, PET, PP, PS, GAG, velvet and other various plastic materials to produce high -grade and various specifications of electronic plastic packaging packaging, stationery sucking packaging, toy sucking packaging packaging packaging , Hardware Breeding Packaging, Food Breeding Packaging, Daily Gifts and Crafts Crafts. Breeding packaging is high -quality, cheap, and more beautified your products, so that more customers are attracted. Plastic packaging is for the purpose of separation, shockproof, and foil. Most of the packaging products are electronics, IT, industrial parts, toys, stationery, food, crafts and cosmetics, etc., which can be packed with small and small products to make the product more beautiful. The suction packaging is also for the purpose of displaying and protecting products. The packaging products are mostly small products. They can be placed or hung on the shelves of the supermarket, so that your products are perfectly displayed in front of customers to promote product sales.
Breeding packaging is divided into four materials: PVC, PET, PS and PP. Depending on the nature of the materials, the things they packaged are different. Moreover, the suction packaging can be divided into plastic bubbles, plastic inner trays, plastic tray, etc. according to the structure, the structure is different, and the things are different. For food, frozen foods such as vegetables, fruit fresh, dumplings, and dumplings are used as food packaging products. It must be produced in accordance with national sanitary standards to ensure non -toxic and environmental protection. Common food -grade materials are PET, PS, PP can be used as food sucking packaging. This packaging can be used to suck in chocolate, candy, biscuits, fruits and vegetables, fresh fresh and other foods. Installing digital products, electronics, and toys, this is generally transparently made of PVC or PET. It is also called plastic bubbles. Install hardware spare parts, electronic components, modules, module PC boards, etc. This kind of blister packaging can be used as different materials according to the requirements, and there is also a special anti -static plastic coating tray, which is also among them. PET and PVC materials have high transparency and good surface luster. Products are widely used in products such as toys, food, electronic products, medicine, electrical appliances, gifts, cosmetics, stationery and other products.
The suction box is a kind of non -fixed, odorless, non -toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastic. It has excellent physical and mechanical properties, especially with excellent impact resistance. High; small creep, stable size; good heat resistance and low temperature resistance, stable mechanical properties, size stability, electrical performance and flame retardant properties within a wider temperature range, which can be at -60 ~ It is used for a long time under 120 ° C; no obvious melting point is melting at 220-230 ° C; due to the large rigidity of the molecular chain, the resin melting viscosity is large; the water absorption rate is small, the contraction rate is small, the size is high, the size stability is good, the film is breathable Small sex; self -extinguishing material; stable light, but not ultraviolet light, good weather resistance; oil resistance, acid resistance, strong alkali, oxidized acid and amine, ketone, soluble in chlorine chloride and aromatic clan The solvent is easy to cause hydrolysis and cracking in water for a long time. The disadvantage is that due to poor anti -fatigue strength, prone to stress cracking, poor anti -solventability, and poor abrasion resistance.
In observing the appearance of the plastic, you can initially identify the major category of plastic products: thermoplastic plastic, thermosetry plastic or elastic body. Generally, thermoplastic plastic has two types: crystallization and non -fixed shape. The appearance of the crystalline plastic is translucent, turbid or opaque, and only is transparent in the thin film state, and the hardness is from soft to keratin. Unde -ified is generally colorless. It is fully transparent when without additives. The hardness is from hard to keratin rubber (at this time adding additives such as plasticizers). Thermosetry plastic usually contains fillers without transparent materials, and is transparent when not contains fillers. Elastic body rubber -like feel has a certain stretching rate. There are two types of suction materials, one is non -loop -protection such as PVC, one is more environmentally friendly such as PP, PS, PET, and of course they are divided into many types in the middle. It is more environmentally friendly and can also be used for export. When it comes to cheap prices, the key is for your products. For different products, choosing properly compliance materials is cheap. For example If you can use 0.3mm thickness, you do n’t choose the thickness of 0.5mm. I personally feel that this is saving. To say that the absolute material is cheaper, in terms of the current market raw material price, it is basically not much different. In other words, the key is to choose the material for product selection.
Breeding products are mainly used for high -quality PVC, PET, PP, PS, GAG, velvet and other various plastic materials to produce high -grade and various specifications of electronic plastic packaging packaging, stationery sucking packaging, toy sucking packaging packaging packaging , Hardware Breeding Packaging, Food Breeding Packaging, Daily Gifts and Crafts Crafts. Breeding packaging is high -quality, cheap, and more beautified your products, so that more customers are attracted. Plastic packaging is for the purpose of separation, shockproof, and foil. Most of the packaging products are electronics, IT, industrial parts, toys, stationery, food, crafts and cosmetics, etc., which can be packed with small and small products to make the product more beautiful. The suction packaging is also for the purpose of displaying and protecting products. The packaging products are mostly small products. They can be placed or hung on the shelves of the supermarket, so that your products are perfectly displayed in front of customers to promote product sales.